Ugears Wooden Mechanical Model - Aviator Model

Take your journey to new heights with the Ugears Wooden Mechanical Model - Aviator! With its engaging construction process and nostalgic charm, this wooden masterpiece is the perfect gift for aviation enthusiasts. It has three modules, the aeroplane, the helicopter and the flight control tower. Parts are made from high-quality plywood and require no glue or cutting to assemble. Soar high with the Aviator Model and experience the thrill of flight like never before.

Key Features

• Do you fly in your dreams? Do you like the feeling? Once again Ugears makes the dream come true reaching out to the sky with its first-ever aircraft model represented by two flying machines in one package.
• The model has three modules - the aeroplane, the helicopter, and the flight control tower. Choose between your aircraft, set one on the tower's bar and you are good to fly. As a beginner pilot, you might want to start with the helicopter which is not as difficult to control as the airplane. Easier to manipulate but no less exciting, your chopper has a cockpit with doors that open and shut, and three-blade main and tail rotors. The aeroplane has a higher velocity and requires a certain skill to operate. This module is based on the wire-braced biplane and has a 5-piston motor.
• To learn how to fly this wayward bird you may need several flight hours - but it is of course part of the fun! Besides, you would have already become acquainted with the basics if you started with the helicopter. However, your cockpit is the control tower, a sophisticated device with a high-performance motor that powers the rotation of the swash plate with the bar - with an aircraft on one side and balance weight on the other.
• The control tower is operated with two control bars the control column regulates the roll and pitch of the flying machine, and the Motor controller adjusts RPM (revolutions per minute) to set the speed of the aircraft. Fine-tuning ensures the proper operation of the swash plate.
• When all three units are assembled and you are ready to dive into the sky, it is time to wind up the motor. Make sure you don't overextend the rubber bands in the motor - maximum winding must not exceed 25 half-turns. Hold on to the control column while releasing the Motor controller's lock to launch your model. Hang on to the wheel, throw caution to the wind, and fly - for the sky is the limit with your new Aviator model from Ugears.
• Made of high-quality plywood; assembly requires no glue or cutting.
• Console size (16.5 x 13.4 x 12.2in (402 x 340 x 310mm); Plane size (5.5 x 4.7 x 3.1in (145 x 120 x 80mm); Helicopter size (8.7 x 7.1 x 3.5in (220 x 185 x 90mm). Package size (14.6 x 6.7 x 2in (378 x 170 x 50mm).
• Number of components (726). Estimated time of assembly (15 hours). Level (Advanced).

All Product Details

Warranty

• bvseo_sdk, p_sdk, 3.2.1
• CLOUD, getContent, 22.58ms
• REVIEWS, PRODUCT
• bvseo-msg: HTTP status code of 404 was returned;

• bvseo_sdk, p_sdk, 3.2.1
• CLOUD, getContent, 21.3ms
• QUESTIONS, PRODUCT
• bvseo-msg: HTTP status code of 404 was returned;

Certainty

With Product Care^TM you have certainty that your product is covered for a specific period of time. If, during the Product Care^TM term, your product fails to operate as a result of an Eligible Fault*, we will provide a one-off replacement of Your Product.

Support

Our experienced support team ensures that the assessment, replacement or remedy process under your Product Care^TM is a convenient experience. Whether you are experiencing a product fault or needing toll free technical assistance, our team is here to provide support every step of the way.

Advantage

Redeem exclusive Additional Benefits which will help you maintain your product and assist in an additional purchase.

There are exclusions and limitations to Product Care^TM. This section should always be read in conjunction with the Terms and Conditions for Product Care^TM.

Learn more about Product Care^TM.